DAN RILEY - TECHNICAL RIDER

A Special Note: Dan Riley's requirements are minimal and reasonable. Any attempt to "save costs" by eliminating items may actually result in a show being seriously delayed or even cancelled. If you have concerns about any item do not hesitate to call in advance of the show date.

SOUND: Dan Riley carries one wireless guitar system. In addition he requires:

• A professional sound system sufficient to fill the entire performance area with clean, clear sound. It will have at least two full-range mains and separate EQ capabilities for both mains and monitor. Ceiling speaker systems are not acceptable!
• 1 Boom type mic stand placed downstage center
• 1 Shure SM-58 hard-wired microphone for vocal
• 1 Shure SM-58 hard-wired microphone near stage as back-up
• !!! SM-58s CANNOT BE SUBSTITUTED - PLEASE, NO "UPGRADES" !!!
• 1 grounded Direct Box with 1/4" input (high impedance) for guitar. See Stage Plot for placement.
• 1 mixing board with at least 4 free channels 1 outboard reverb effects processor (Yamaha SPX preferred)
• 1 wedge monitor placed stage left of microphone, aimed at performer
• AC power side stage for effects units

LIGHTS:

• 1 Mini-Trouper spotlight with "no-color" pink gel
• At least 4 front or side specials, one blue and one red on each side, w/separate color intensity controls.
• Total control of house lighting (3/4 house lights preferred)

SOUND AND SPOTLIGHT OPERATORS MUST BE WELL-SEASONED PROFESSIONALS CAPABLE OF MEETING TROUBLE-SHOOTING NEEDS OF ALL EQUIPMENT.

Stage should be minimum 10' wide x 6' deep x 2' high.

Please position stage as close as possible to audience.

Purchaser Initial: